FAQ
1. What does your inspection cover?
The inspector should ensure that their inspection and inspection report will meet all applicable requirements in your state if applicable and will comply with a well-recognized standard of practice and code of ethics. You should be able to request and see a copy of these items ahead of time and ask any questions you may have. If there are any areas you want to make sure are inspected, be sure to identify them upfront.
2. How long have you been practicing in the home inspection profession and how many inspections have you completed?
The inspector should be able to provide his or her history in the profession and perhaps even a few names as referrals. Newer inspectors can be very qualified, and many work with a partner or have access to more experienced inspectors to assist them in the inspection.
3. Are you specifically experienced in residential inspection?
Related experience in construction or engineering is helpful, but is no substitute for training and experience in the unique discipline of home inspection. If the inspection is for a commercial property, then this should be asked about as well.
4. Do you offer to do repairs or improvements based on the inspection?
Some inspector associations and state regulations allow the inspector to perform repair work on problems uncovered in the inspection. Other associations and regulations strictly forbid this as a conflict of interest.
5. How long will the inspection take?
The average on-site inspection time for a single inspector is 2 to 4 hours depending on the condition and size of the property. Anything significantly less may not be enough time to perform a thorough inspection. Additional inspectors may be brought in for very large properties and buildings.
6. How much will it cost?
Costs vary dramatically, depending on the level and type of inspection, the property floor area, property geographical location and the inspector’s qualifications. A typical range might be $350–$500, but consider the value of the home inspection in terms of the investment being made. Inspection cost does not necessarily reflect quality.
7. What type of inspection report do you provide and how long will it take to receive the report?
Ask to see samples and determine whether or not you can understand the inspector’s reporting style and if the time parameters fulfill your needs. Most inspectors provide their full report within 24 hours of the inspection.
8. Will I be able to attend the inspection?
This is a valuable educational opportunity, and an inspector’s refusal to allow this should raise a red flag. Never pass up this opportunity to see your prospective home through the eyes of an expert.
9. Do you maintain membership in a professional home inspector association?
There are many state and national associations for home inspectors. Request to see their membership ID, and perform whatever due diligence you deem appropriate.
10. Do you participate in continuing education programs to keep your expertise up to date?
One can never know it all, and the inspector’s commitment to continuing education is a good measure of his or her professionalism and service to the consumer. This is especially important in cases where the home is much older or includes unique elements requiring additional or updated training
11. Is aluminum wiring bad?
No, due to implications in numerous house fires, the once common practice of using aluminum wiring during the 1970’s is no longer permitted in new installations in most jurisdictions. If your house has aluminum wiring you do not necessarily need to panic. Aluminum wiring can be just as safe as copper wire as long as it has been installed correctly. The concern with aluminum wiring is that it is very unforgiving if it has been installed incorrectly.
Aluminum wiring expands when it warms up, and contracts then it cools down. Aluminum reacts differently than copper wire after several warm/cooling cycles. After each cycle aluminum tends to lose more of its tightness. This process is often referred to as “cold creep”. Combined with aluminum’s tendency to oxidize when in contact with certain metals, these factors can lead to dangerous problems. When aluminum oxidizes it heats up more to conduct the same amount of electricity, which then causes more oxidation. Due to this cycle, eventually the wires may start to get very hot, melt the fixture that it attached to, and even possibly cause a fire.
If you are considering purchasing a home with aluminum wiring, or have discovered it later, it would be a good idea to hire a licensed electrician or inspector to check over the wiring for any potential problems.
